Older Civic hatches (EG and EK) are four-stud 4x100 cars, and our customers run SpeedWorks SW08 15x8 +15 on them. The FC Civic, DC5 Integra and Accord Euro are five-stud 5x114.3 cars, where customers run 18x8 +38 to 18x8.5 +35. Check the stud count on your current wheels or your placard before ordering.
Honda stud patterns and centre bore at a glance
Honda used 4x100 on most older small cars and moved to 5x114.3 on the larger and later models. The hub centre bore on the 4x100 Civics is 56.1 mm, and on the 5x114.3 models covered here it is 64.1 mm. Every SpeedWorks SW passenger wheel has a 73.1 mm bore, so you need a hub-centric ring to centre it: 73.1 to 56.1 for EG and EK, or 73.1 to 64.1 for the five-stud cars. Both sizes are available as alloy hub-centric rings and plastic hub-centric rings.
| Model | Stud pattern | Hub ring (from 73.1) |
|---|---|---|
| Civic hatch EG / EK | 4x100 | 56.1 mm |
| Civic sedan FC | 5x114.3 | 64.1 mm |
| Integra DC5 | 5x114.3 | 64.1 mm |
| Accord Euro CL9 / CU | 5x114.3 | 64.1 mm |
Real Honda builds from our gallery
These are customer cars. See the photos in the Honda section of our gallery.
| Car | Wheel | Size and offset | Stud pattern |
|---|---|---|---|
| Honda Civic hatch EG | SW08 | 15x8 +15 | 4x100 |
| Honda Civic hatch EK (two builds) | SW08 | 15x8 +15 | 4x100 |
| Honda Civic sedan FC | SW15 Hyper Black | 18x8.5 +35 | 5x114.3 |
| Honda Integra DC5 | SW06 | 18x8.5 +35 | 5x114.3 |
| Honda Integra DC5 | SW10 | 18x8.5 +38 | 5x114.3 |
| Honda Accord Euro CL9 | SW01 | 18x8 +38 | 5x114.3 |
| Honda Accord Euro CU | SW19 Bronze | 18x8.5 +38 | 5x114.3 |
Civic EG and EK: old-school 15s
The SW08 is a deep-dish, old-school JDM style cast wheel in 15x8 +15, drilled for both 4x100 and 4x114.3, in Hyper Black and Machine Lip. It starts from $212.50 per wheel. Three of our EG and EK customers run it. A 15x8 at +15 sits further out than most factory Civic wheels, which is the look people are after, but it may need guard work or a lowered ride height depending on the car, so ask us if you are unsure. Note that the EK9 Civic Type R is a five-stud car, so the SW08 does not suit it.
You can see every SW08 build, including MX-5s, Lancers and Mirages, in the SW08 gallery.
Civic FC: 18x8.5 +35
A customer's FC Civic sedan runs SW15 18x8.5 +35 in Hyper Black, a flow-formed 6-spoke from $250 per wheel. That is a sensible daily fitment. Other 5x114.3 wheels in the 18x8 to 18x8.5 range with offsets around +35 to +40, like SW14, SW16 and SW23, match the stud pattern, but offset, brake clearance and guard clearance still need to be checked for your car.
Integra DC5: 18x8.5 +35 to +38
Two DC5 customers have gone different ways: one on SW06 18x8.5 +35 in Gloss Black and Machine Lip (from $225 per wheel), the other on SW10 18x8.5 +38 in Hyper Silver. The 3 mm difference in offset is small, so either sits in a similar spot under the guard. SW06 and SW10 also come in 18x9.5 for a wider look, but we have no DC5 build on those yet, so treat 18x9.5 as something to check with us first.
Accord Euro: 18x8 +38 and 18x8.5 +38
The Accord Euro is a bigger, heavier car and most owners want a tidy, comfortable fitment. A CL9 customer runs SW01 18x8 +38 and a CU customer runs SW19 18x8.5 +38 in Bronze, from $225 per wheel. Both wheels are flow-formed and dual-drilled for 5x100 and 5x114.3.
How to check your fitment
- Count your studs and confirm 4x100 or 5x114.3 on the car or placard.
- Enter your current and new wheel sizes in our wheel offset calculator to see how far the face and inner edge move.
- Order the matching hub-centric rings.
- Check caliper clearance if you have upgraded brakes.
All SW wheels carry a 690 kg load rating per wheel and are certified to JWL, VIA and AS1638. They are sold per wheel, shipped in sets of four, and come with free SpeedWorks centre caps. Message us with your model and year if you would like a recommendation.
Frequently asked questions
What stud pattern is an EG or EK Civic?
Non-Type R EG and EK Civics are 4x100. The EK9 Type R is 5x114.3. Count the studs to be sure.
Will SW08 fit my EK Civic?
Two EK hatch customers and an EG hatch customer run SW08 15x8 +15. It is a wide, low-offset fitment that may need guard work or a lowered ride height depending on the car, so ask us if you are unsure.
What size wheels fit a DC5 Integra?
Our DC5 customers run 18x8.5 +35 (SW06) and 18x8.5 +38 (SW10), both 5x114.3, with 73.1 to 64.1 hub-centric rings.
What hub ring does a Honda need?
For SpeedWorks SW wheels, use 73.1 to 56.1 on EG and EK Civics and 73.1 to 64.1 on the FC Civic, DC5 Integra and Accord Euro. If you are not sure, choose "Pick for me" and we will match it to your car.