The Toyota Chaser JZX100 uses a 5x114.3 stud pattern, and the most common setup on our customers' Chasers is 18x9.5 +22, run on the SpeedWorks SW12 and SW10. The same 18x9.5 +22 size is proven on a customer Mark II (X110) and a Cressida (MX83), and one Cressida runs a staggered 18x9.5 +22 / 18x10.5 +22. For a milder fit, a customer Chaser runs 18x8 +38 on the SW01, and the Lexus IS200/IS300 runs both of these sizes too.
Specs at a glance
| Car | Stud pattern | Hub centre bore | Hub ring for SW wheels |
|---|---|---|---|
| Toyota Chaser JZX100 | 5x114.3 | 60.1 mm | 73.1 to 60.1 mm |
| Toyota Mark II X110 | 5x114.3 | 60.1 mm | 73.1 to 60.1 mm |
| Toyota Cressida MX83 | 5x114.3 | 60.1 mm | 73.1 to 60.1 mm |
| Lexus IS200 / IS300 | 5x114.3 | 60.1 mm | 73.1 to 60.1 mm |
For factory wheel and tyre sizes, check your tyre placard or the wheels currently on the car.
Real customer setups
| Car | Wheel | Size and offset | Finish |
|---|---|---|---|
| Toyota Chaser JZX100 (two builds) | SW12 | 18x9.5 +22 (5x114.3) | Hyper Black & Machine Lip |
| Toyota Chaser JZX100 | SW10 | 18x9.5 +22 | Hyper Silver |
| Toyota Chaser JZX100 | SW01 | 18x8 +38 | Bronze |
| Toyota Mark II X110 (Grande) | SW12 | 18x9.5 +22 | Hyper Black & Machine Lip |
| Toyota Cressida MX83 | SW12 | 18x9.5 +22 | - |
| Toyota Cressida MX83 | SW17 | 18x9.5 +22 front / 18x10.5 +22 rear | Gloss Black & Machine Lip |
| Lexus IS200 / IS300 | SW12 | 18x9.5 +22 | - |
| Lexus IS200 / IS300 | SW01 | 18x8 +38 | - |
See them in the Toyota gallery and the SW12 gallery.
Toyota Chaser JZX100
18x9.5 +22: the go-to Chaser fit
Three customer Chasers run 18x9.5 +22: two on the SW12 10-spoke in Hyper Black & Machine Lip, and one on the SW10 in Hyper Silver, from $225 per wheel. The SW12 also comes in Gloss White & Machine Lip in the same size, from $250 per wheel.
Other 5x114.3 wheels made in the same 18x9.5 +22 size and offset include SW14 (Matte Gunmetal), SW15 (Hyper Black), SW18 (Bronze mesh) and SW17 (retro deep lip). Size and offset match our customer cars, but always check brake and guard clearance on your car. Depending on ride height and tyres, 18x9.5 +22 may need guard work or a lowered ride height; ask us.
18x8 +38: the milder option
A customer Chaser runs the SW01 18x8 +38 in Bronze, a flow-formed wheel drilled for 5x100 and 5x114.3, from $225 per wheel. On paper, 18x8 +38 sits about 35 mm further in at the face than 18x9.5 +22 (rim edge only), so it is the easier choice for a car at or near standard height.
Toyota Mark II X110
A customer's Mark II Grande runs the SW12 in 18x9.5 +22, Hyper Black & Machine Lip. The other 18x9.5 +22 wheels listed above share the same size and offset, but the Mark II is not yet in our gallery on those, so check clearance first.
Toyota Cressida MX83
Two customer Cressidas are in our gallery. One runs the SW12 in 18x9.5 +22. The other runs the SW17, a cast retro 5-spoke with a deep lip, staggered 18x9.5 +22 front and 18x10.5 +22 rear, from $275 per wheel. The 10.5 rear sits about 13 mm further out at the face and about 13 mm further in at the back than the 9.5, so check inner clearance at the rear as well as the guard.
Related: Lexus IS200 and IS300
Customer Lexus IS200/IS300s in our Lexus gallery run the same two sizes as the Chaser: the SW01 in 18x8 +38 and the SW12 in 18x9.5 +22. Both need a 73.1 to 60.1 mm hub ring with SW wheels. Other 5x114.3 wheels in 18x8 to 18x8.75 with offsets from +35 to +40, such as SW04, SW19, SW20 and SW23, match the stud pattern, but offset, brake clearance and guards must be checked as we do not have an IS on them yet.
Hub rings, delivery and warranty
Use a 73.1 to 60.1 mm hub-centric ring, in alloy or plastic, or choose "Pick for me". Wheels are sold per wheel and shipped in sets of four with free SpeedWorks centre caps. Delivery is tracked and insured. SW passenger wheels are rated to 690 kg each, certified JWL, VIA and AS1638, with a 12-month warranty against defects in materials and finish. Compare sizes with our wheel offset calculator.
Frequently asked questions
What stud pattern is a JZX100 Chaser?
5x114.3. Customer Chasers in our gallery run 5x114.3 wheels.
What is the most popular wheel size for a Chaser?
18x9.5 +22. Three customer JZX100s run it, on SW12 and SW10.
What hub ring do I need for a Chaser, Mark II, Cressida or Lexus IS?
A 73.1 to 60.1 mm hub-centric ring with SpeedWorks SW wheels.
Can a Cressida run a staggered setup?
Yes. A customer MX83 runs SW17 in 18x9.5 +22 front and 18x10.5 +22 rear. Check rear inner and guard clearance on your car, or contact us.
Will 18x9.5 +22 fit without guard work?
It depends on ride height, tyres and the car's guards. It may need guard work or a lowered ride height. See our FAQ or ask us.