The Hyundai i30 N, i30 PD and i20 N use a 5x114.3 stud pattern with a 67.1 mm hub centre bore. Our customers run 18x8 +35, 18x8 +38 and 18x8.5 +38 on them, on the SW01, SW02, SW10 and SW16. Every SpeedWorks wheel has a 73.1 mm centre bore, and we sell a 73.1 to 67.1 mm hub-centric ring to suit.
i30 N, i30 PD and i20 N specs at a glance
- Stud pattern (PCD): 5x114.3
- Hub centre bore: 67.1 mm
- SpeedWorks centre bore: 73.1 mm on every SW passenger wheel
- Hub-centric ring: 73.1 to 67.1 mm, available in alloy and plastic
- Load rating: 690 kg per wheel, certified JWL, VIA and AS1638
Check your tyre placard and current wheels before ordering. The i30 N has larger front brakes than a standard i30, so we only recommend sizes we have seen fit, or ask you to confirm clearance with us.
Real Hyundai builds on SpeedWorks wheels
These are customer cars from our gallery.
| Car | Wheel | Size and offset | PCD |
|---|---|---|---|
| Hyundai i30 N | SW02 | 18x8 +35 | 5x114.3 |
| Hyundai i30 N | SW10 | 18x8.5 +38 | 5x114.3 |
| Hyundai i30 N | SW16 | 18x8.5 +38 | 5x114.3 |
| Hyundai i30 PD | SW01 | 18x8 +38 | 5x114.3 |
| Hyundai i20 N | SW01 | 18x8 +38 | 5x114.3 |
Hyundai i30 N wheels
SW02: 18x8 +35
The SW02 is flow-formed in Hyper Black or Machine Lip. In 5x114.3 it comes in 18x8 +35, the size on our i30 N build. From $250 per wheel.
SW16: 18x8.5 +38
The SW16 is a flow-formed split 10-spoke. In 5x114.3 it comes in 18x8.5 +38, Hyper Black, the same size an i30 N owner runs. From $275 per wheel.
SW10: 18x8.5 +38
The SW10 is a cast wheel in Hyper Silver. An i30 N runs it in 18x8.5 +38. From $225 per wheel. The SW10 also comes in 18x9.5 +22, but that is a much more aggressive fitment and we don't have an i30 N on it, so ask us before considering it.
Hyundai i30 PD and i20 N wheels
An i30 PD and an i20 N both run the SW01 in 18x8 +38. It is flow-formed and dual-drilled 5x100 and 5x114.3. From $225 per wheel. The i20 N is a smaller car than the i30, and 18x8 +38 is the most conservative size in our Hyundai builds.
Other 5x114.3 SpeedWorks wheels in a similar size
These share the stud pattern and sit close to the proven sizes above, but there is no Hyundai build on them yet. The stud pattern matches, but offset, brake clearance and guards must be checked before you order.
- SW19 18x8.5 +38, flow-formed Bronze, from $225 per wheel
- SW23 18x8.5 +40, cast Hyper Black, from $225 per wheel
- SW03 18x8 +38, flow-formed Matte Black, from $225 per wheel
- SW20 18x8.75 +35, flow-formed Hyper Black or Matte Black, from $225 per wheel
- SW15 18x8.5 +35, flow-formed Hyper Black, from $250 per wheel
- SW14 18x8.5 +35, flow-formed Matte Gunmetal, from $237.50 per wheel
Moving from +38 to +35 at the same width pushes the wheel face 3 mm further out. Use our wheel offset calculator to compare against your current wheels. Wider or lower-offset setups may need guard work or a lowered ride height depending on the car; ask us.
Hub-centric rings
Because our wheels have a 73.1 mm bore and the Hyundai hub is 67.1 mm, a hub-centric ring centres the wheel on the hub. We sell 73.1 to 67.1 mm rings in both alloy and plastic.
Ordering and delivery
Wheels are sold per wheel and shipped in sets of four, with free SpeedWorks centre caps. Delivery is tracked and insured, typically 2-7 business days to metro areas and up to 14 or more to regional areas. We are in Kingswood (Penrith), Sydney, and pickup is available by arrangement. SW wheels carry a 12 month warranty against defects in materials and finish.
Frequently asked questions
What stud pattern is a Hyundai i30 N?
The i30 N uses 5x114.3 with a 67.1 mm hub bore. All the wheels in our i30 N builds are 5x114.3.
What offset do I need for an i30 N?
Our customers run +35 at 8 inches wide and +38 at 8.5 inches wide, all in 18 inch. The SW02 18x8 +35, SW10 18x8.5 +38 and SW16 18x8.5 +38 are all on real i30 N builds.
What wheels fit an i20 N?
A customer's i20 N runs the SW01 in 18x8 +38. That is the only i20 N setup in our gallery, so ask us before trying a wider or lower-offset wheel.
Do i30 N wheels fit an i30 PD?
They share the same stud pattern, but brakes and factory sizes can differ. A customer's i30 PD runs the SW01 18x8 +38. Check your placard and current wheels, or message us.
Which hub-centric ring do I need for a Hyundai?
The 73.1 to 67.1 mm ring, available in alloy or plastic. If you are not sure, choose "Pick for me" and we will match it to your car.